================================================================================ INSTALLING AEMM.SYS ================================================================================ First, follow the instructions for installing your AT&T enhanced memory expansion board. Next, copy the file AEMM.SYS from the Utilities Disk to your fixed disk. Then add the following command line to your CONFIG.SYS file: device=[drive:][path]AEMM.SYS [/X=mmmm-nnnn] The /X parameter allows you to exclude certain ranges of your expanded memory from being used for mapping. To exclude a range of memory, you should replace mmmm with the hexadecimal segment number representing the beginning address, and nnnn with the hexadecimal segment number representing the ending address of the memory you wish to exclude. With Windows 2.0, you should exclude that part of memory required by your graphics adapter. Following is a list of the appropriate beginning and ending segment numbers for those AT&T display adapters included in the Windows package. If Windows does not include a driver for your display adapter, then consult your display's documentation or manufacturer to determine what range of memory the display adapter uses. For the AT&T monochrome (indigenous) display adapter use B800-BFFF For any AT&T color display adapter use A000-BFFF. ================================================================================ END OF AEMM.TXT ================================================================================